K-2180 used to shock absorber asse...
K-2180 used to shock absorber assembly line
2013-09-16 14:19:49
K-2180 Industry Air Impact Wrench Used on Motorcycle assembly
Motorcycle shock absorber assembly line, a station every day to complete the 2000 artifacts, 8000 M10 - M18 wrench to tighten the screws, special high use frequency, and need weight by cutting tools to reduce labor intensity. Also on the performance of the wrench is very demanding. Comprehensive above factors we chose the K - 2180. Use the effect is very good.
| Specification | |
| Square drive (inch) | 1/2" |
| Capacity Bolt Size (mm) | M22 |
| Free Speed (rpm) | 8000rpm |
| Max Torque (Nm ft-lb) | 730Nm 540ft-lbs |
| Overall Length (mm) | 183mm |
| Air Hose (I.D) | 3/8" |
| Air Inlet (PT) | 1/4" |
| Air Consumption (cfm L/min) | 4.2cfm 119L/min |
| Net Weight (lbs/kgs) | 4.18lbs 1.90kgs |
